Pro tips for adhesive

Maximum retention: Lasts up to 7 weeks with proper application and aftercare. Always remember to use a primer/booster and a super bonder to maximize retention.

Drop renewal: Replace your drop of glue every 10 to 15 seconds. The glue reacts with the humidity in the air, becomes viscous (stringy) and loses its effectiveness.

Work environment: The products should be used in a well-ventilated area and away from direct sunlight.

Allergy test (Patch test): A skin test is mandatory before using this product. Each adhesive has different percentages of ingredients.

Notice : Read the instructions on the back of the label carefully before use.

Eye safety: The product must be used exclusively on completely closed eyes throughout the application to avoid any eye irritation.

Glue sampling: Dip the eyelash extension right into the center of the drop of glue, as it always starts to dry from the outside.

Protection : Use gel eye patches or medical foam tape to minimize vapor emissions.

Heat-reducing tip: In hot weather or high humidity, we recommend applying your drop of glue to a glossy surface (such as the removable protective film on hydrogel patches). This will limit the amount of moisture absorbed by the surface and prevent the glue from polymerizing too quickly, unlike when using a jade stone or a glue ring.

Made in Korea

Instructions for using the adhesive

Origin : Made in Korea.

Working conditions: Humidity: 45-60% | Temperature: 17-23°C.

Shelf life: An unopened bottle can be stored for up to 6 months. Once opened, the maximum usage period is 1 month.

Storage conditions: Humidity: Less than 40-45% | Temperature: 8-13°C.

Important note

Inappropriate environmental conditions in your application booth directly impair adhesion. The ideal temperature for the adhesive is between 17 and 23°C and the humidity level between 45 and 60%.

Please keep in mind that if your:

• Temperature is below 17°C: the glue may dry more slowly.
• Temperature is above 23°C: the glue can dry more quickly.
• Humidity is less than 45%: the glue may dry more slowly.
• Humidity is above 60%: the glue can dry faster.

Step-by-step user guide

1. Remove the cap and insert the glue needle into the nozzle (the tip).
2. Shake vigorously for 1 minute before use to ensure all ingredients are thoroughly mixed.
3. Apply the required amount of glue to your jade stone.
4. Apply a tiny drop of glue to the extension and immediately place it on the natural lash. DO NOT smooth or rub the extension onto the lash.
5. "Breathe" the adhesive bottle (squeeze lightly to expel the air) after each use to prevent air bubbles from forming in the nozzle.